Simplicity 2156 Girls’ Leggings in Double Brushed Polyester

Standard
Simplicity 2156 Girls’ Leggings in Double Brushed Polyester

Need some basic leggings for a kid or tween in your life? I’ve got you! Today’s post is a look back at some Christmas sewing I did for one of my kids, and it involves leggings. Actually, it’s only leggings!

In this case, I made two pairs. They are a great thing to sew for others because of the forgiving fit or for yourself as a palette-cleanser since they are quick and easy if you go for a basic pattern. And Simplicity 2156, View A contains your basic girls’ leggings pattern.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Simplicity 2156 Girls' Leggings in Double Brushed Polyester

The fabric I used came from online retailer Cali Fabrics. I went looking for some double brushed polyester knit for a pattern I wanted to try since I knew they carried this substrate, and I had my daughter look through and pick out a few she liked as well. Double brushed polyester is a stretchy, thin, soft fabric, like what you would find in super soft ready-to-wear (RTW) leggings or other garments. It’s quite easy to find these days in lots of solids and prints, and it’s often fairly inexpensive.

I had questions about whether or not the fabric would be opaque enough to actually wear as leggings, but I figured they could always work as footless tights if they ended up on the see-through side of things.

I ordered some fabric in “lavender” as well as a “midnight galaxy” print. The lavender was slightly stretchier, but both have lots of good stretch and recovery to them as each is polyester blended with spandex.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Lavender leggings. The color is a bit more purple in real life.
Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Midnight galaxy leggings. You have to watch the print placement a little bit with this one.

The pattern itself was straightforward and easy to follow. The only real fit question I had was about the rise. If you are making this for a child who loves a high rise, these are great. My daughter prefers to wear her waistbands a little lower, so next time, I would take two inches out of the rise. I had had my doubts about it, but just wasn’t sure if I wanted to lower it or not. I made the galaxy print leggings first, and then compared them to some leggings she already owned, and quickly saw that the ones I had made had a much higher rise.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester

I folded out two inches just under the waistband, and used my serger to trim the fabric and sew a seam there, shortening the top of the leggings but preserving the waistband I had just created.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Simplicity 2156 Girls' Leggings in Double Brushed Polyester

For the purple pair, I cut two inches off the top before sewing in the elastic for the waistband.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester

Also, unlike in the directions, which have you make a casing and insert elastic, I used my sewing machine to zigzag the elastic to the top of the leggings, leaving a bit of fabric above, then I folded them over and zigzagged over the edge of the fabric.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Simplicity 2156 Girls' Leggings in Double Brushed Polyester

I found this faster and easier, and now the elastic will never twist. I also used a zigzag for the hems, and used my serger for other parts of construction. And last but not least, I sewed some little tags into the back of the leggings.

Simplicity 2156 Girls' Leggings in Double Brushed Polyester
Simplicity 2156 Girls' Leggings in Double Brushed Polyester

In case you are curious, when sewing on the sewing machine, I used a zigzag with a 6.5 width, and 0.5 length, a heavier presser foot pressure (three on my machine), a walking foot, and used all purpose polyester thread in my needle and woolly nylon in my bobbin. The fabric tunneled a bit and was wavy when unworn, but the thread didn’t break when stretched and the waviness disappears when worn. Now that I have grown slightly more patient than I used to be, I always do little tests on my scraps before sewing knits in order to get a stitch that will do what I want it to and won’t break when stretched.

Happily, these fit, although slightly loosely in the legs, which I am ok with, since that means there is some growing room. They turned out to be opaque and wearable as leggings, which was great. And my daughter liked them and has worn them several times. Yay! This proved to be an easy project with lots of wearability.

Advertisement

4 responses »

  1. Love that Midnight Galaxy print. So cute made into those leggings. You are becoming quite good with your serger. Great job; and more importanly, is when our children actually want to wear what we’ve made for them! 😀

    Liked by 1 person

Comments? Leave them here.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.