Simplicity 8841 Tapered Pants in Pink Denim…and Exciting Topsfield Fair News!

Let’s start with the pants! These pants, made using Simplicity 8841, are a repeat pattern for me–not something I always do. Each sewist/craftsman/artist has a way they like to dive into projects, and for me, it usually involves trying something new, often a new pattern, so I rarely circle back to previous patterns unless I really liked them and want more versions in my closet or they are just right for the fabric I want to use. I really liked the style of these pants, and I wear my first version a lot. However, I kind of overfit that version, and I thought I could do better…plus I really did want more of these in my closet!

My husband took these pictures for me when it was still summer, but these pants will work in multiple seasons.

The other thing that drove this repeat performance was some great denim I found at Joann’s. It was 100% cotton, and pink from being vegetable-dyed. The vegetable dye made me curious about how the color would hold…and I really like this shade of pink. Simplicity 8841 seemed like a good match for the denim. I got what I needed when it was on sale. Yay!

According to my measurements, I was a size 24 in this pattern. It only went up to a 22, so I did some very inexpert, cheater-style grading. I looked at the distance between the last few pattern sizes, and sized up the largest size by that amount, by just tracing around it, and trying to make things look like they would have if there had been one more size. I wanted to make View D, but with the longer length of View C. This was pretty easy to do.

l

Using the book, Sewing Pants that Fit from The Singer Sewing Reference Library, I added 1.5″ to the back crotch length by making a wedge adjustment for a protruding seat. This entailed cutting into my back pattern piece from the crotch seam to the hip, without cutting all the way through. I then tipped the top of the pattern up 1.5″ making the back crotch seam of the pattern longer. After doing that, you have to smooth out the hip/outseam because making that wedge creates a little divot at the side seam.

Then I lengthened the back crotch point by 1.5″ and lowered it 0.25″ to true the pattern. This can help with full thighs or a protruding seat. I have found that it works for me, whatever the reason may be. I tend to need more length in the back with Big 4 patterns. Somehow it always feels a little bit like trial and error, but I usually end up making the maximum crotch seam length adjustments on the back pattern piece and find those really comfortable.

This may not be the most helpful picture, but here is the top of the back pattern piece. The crotch seam I have mentions is that curved left edge, and the hip/outseam is the right edge. You can kind of see the wedge shape running horizontally through the pattern piece.

These pants are pretty straightforward to put together with good directions.

Simplicity 8841, front

l

Simplicity 8841, back

l

Simplicity 8841, patch pocket detail; I have traced this patch pocket onto tag board and use it whenever I want to add patch pockets with this shape to clothes.

I changed up how I inserted the elastic into the waistband a little bit, but otherwise followed the directions as written. Since these pants have no fly, and only front patch pockets, I pushed myself to finish them before meeting up with a friend who was visiting. It’s always really fun to have something new to wear for something like that, and it’s good for me to occasionally give myself artificial deadlines to speed a project on.

Once I started wearing the pants, I had a few thoughts about them. They are definitely a style I like, and they’re very comfortable. The dye in the fabric seems to be holding well, too.

l

I’m not sure I love how they look, even though I love how they feel. They look a little too big to me. I’m all about preserving design ease and not making the smallest size you can squeeze your body into, but maybe I could have made these a little smaller, especially since the size 22 pants that I made do still fit. The other iffy part is that the waistband doesn’t feel as strong as I want it to. The pants stay up just fine, but it feels like if I load up my pockets, things could get saggy. Yikes.

I have toyed with the idea of taking off the waistband and cutting a new one that would allow for 2″ wide elastic, like the Elizabeth Suzann Clyde Pants pattern, but I cannot tell you how much I really don’t like going back into patterns once I have finished them. I know they would be more wearable if I altered them, but the joy of alterations is not the reason I sew. The fact that they do fit and are comfortable will probably be enough for me to wear them and not bother to alter them. The good news is that the paper pattern adjustments I made were good. I don’t feel like the back of the pants are too short or tight (i.e. no wedgies or “plumber’s butt”–yay!). They feel just right.

The real kicker, though, is that while writing this, I looked back at the blog post I wrote for the first pair of pants I made, and those had the same problems! Yes, if I had carefully read my own post before starting on these, I wouldn’t have graded up, and I probably would have tapered the legs of the pants. I still would have made the flat pattern adjustments I made this time–I did remember the need for those–but I could have made an even better pair of pants if I had listened to my past self and reminded myself of all the changes that would have been helpful. Oops.

So, I guess this project is a little bit of a mixed bag, but overall good. I do recommend the pattern if you are looking for a simple pair of elastic-waist pants. These could definitely work, construction-wise, for a beginner, and they are loose enough that you wouldn’t have to think about fitting to the level you would with a pair of skinny jeans or something like that. I would potentially make these again, with some slight tweaks (after actually reading this post and my last one; haha).

News from the Fair!

And now for something unrelated, but awesome! If you read this blog regularly, you may remember that I submitted some garments to the Topsfield (Massachusetts) Fair for the first time. Well, the cardigan I knitted got a first place ribbon, and the reversible vest I sewed got both a first place ribbon and Best in Show! I was so excited!!! I knew that I had worked up to my skill level at the time and pushed myself beyond on those projects, but it’s really, really nice to occasionally have some outside validation for your work, from people who also make things.

My Arrowhead Cardigan at the Topsfield Fair

l

Me at the knitting exhibit. You can sort of see my cardigan by my left hand. There were so many great projects!

l

My vest and both its ribbons at the Topsfield Fair!!!

l

This exhibit had multiple types of crafts. You can see my vest by my right hand.

Making clothes is my art practice. My work will probably never be in a gallery, and I don’t want to turn it into a business, so I don’t get that kind of positive professional critique on a normal basis, so it means a lot. That being said, I do very much appreciate all the cheerleading and support I get from my family and friends. That is what has really kept me going all these years.

My parents and kids were with me when I went to see all the entries, and they can tell you that I had a pretty big smile on my face. What a great experience!!!

Advertisement