We pick sewing projects for different reasons–something you need in your wardrobe, putting your own spin on a designer garment you could never afford, using a favorite fabric, the desire to try an intriguing pattern. The Elizabeth Suzann Studio Clyde Work Pant was my intriguing pattern. I had heard of Elizabeth Suzann, a slow-fashion designer, because of Lauren Taylor (known as Lladybird in the sewing community), who had previously worked for her. Many in the sewing community and beyond loved this brand, and there was a lot of buzz when Elizabeth Suzann decided to close her business, but made some of her garments available as sewing patterns for free. Eventually, she wrote directions for the patterns and re-released them with a pay-what-you-can model on her website.
I kept seeing her Clyde Work Pant pattern and was curious about what it would be like to make and how I would like the huge, curving pockets on the sides. They were so different from anything else in my wardrobe, and I never would have been able to afford a pair or have a chance to try them on when they were only available as ready-to-wear. So, having no money for patterns at the time, I took her up on the pay-what-you-can offer, and grabbed a free copy of the pattern.
At the time I wanted to make these, it was August. (I made them before the gingham top I shared a few weeks back.) My husband had given me a gift of enough rust orange linen to make these pants, so I printed the pattern and cut them out. I wasn’t sure if I wanted to make my size or go up a size to make absolutely sure the waist would pull over my hips. In the end, I made a size 16 in the “regular” height, which is where my measurements put me, although I could have gone either way on the height, since I’m about 5′ 8.5″. I also wondered if the ankles would fit over my heels, but I decided to just jump in and see what happened.
The instructions were nice and clear with good illustrations. There was no specific recommendation for how to finish your seams, although if you looked closely at a few of the illustrations, it seemed like the edges were serged. Since I love the look of beautifully finished insides, especially in linen, I chose to use a combination of French and flat-felled seams. While this really did create beautiful insides with not a raw edge in sight, it turned out to be a poor choice for the fabric I was using.
I wouldn’t call my linen a loose weave, really, but after wearing these for just a short time, the stitching holes started to open up a little bit and raw edges began to pop out at stress points. This wasn’t because I didn’t do a good job of finishing–it was just that in this fabric with this pattern, the better choice would have been to serge without trimming or zigzag my seam allowances together, press them to the sides in most cases, and topstitch. That would have left my seam allowances intact or at least not super narrow and provided less of a chance for ends and edges to pop out.
I thought that I would have to start patching my new pants almost immediately, but it seems that just a wide satin stitch has, so far, taken care of the problem, while blending in pretty well. I have the most issues at stress points like the bottom corners of the pockets on the front, the tops of the front seams on the legs, and the right back calf.
The pants were a pretty quick sewing project, and were not too hard to make, which was great. The only part that was a little tricky/fiddly was the waistband. I really like the idea of how the elastic is inserted, but it can be a little tough to do it well. My advice is to go slowly. I also added a few more pins than recommended, in order to keep everything where I wanted it.
Also, the pockets really are huge. I could fit a book in there! They’re so fun.
As for fit, these pants are really interesting. They are definitely comfortable, and I have no trouble getting my waistband over my hips. The rise is really high, which I am guessing might be a way of ensuring that these pants fit many body shapes well, and also makes it possible to wear them at your natural waist or below, as you prefer.
Thankfully, I had no trouble getting the foot holes over my heels, though it’s a close fit.
Standing, these are very comfortable.
Sitting and crouching, I notice that they get more snug around the stress points I mentioned. I suppose that next time I could either size up, or adjust the lower legs to be slightly larger, or try the tall length. I still find them very comfortable, and wonder how they would be in a bottomweight cotton twill or something a bit more durable than the linen I chose.
As for the fabric…I know it didn’t work out perfectly, but…I just love it. It’s a100% midweight linen originally from Fabric Mart. I love the color so much, and it’s not usually a color I go for. It has been great pairing it with a pink linen shirt in summer and now my purple Wool & Honey sweater (pattern by Drea Renee Knits) in fall. It’s so soft and comfortable too. Is it a doomed love? Maybe. I hope these pants last, and I’m not happy that I may have to keep repairing them, but I love this fabric. These pants are agreat transitional garment between seasons.
This was a really fun pattern with wonderful instructions, and even though I made some choices that gave me a few issues, those weren’t the fault of the pattern, which is excellent. In fact, I would love to make them again, despite my poor track record for repeating patterns.
Pattern and Branch 