Hi, everyone! My blogging has certainly slowed down a bit, but I’m back today with a whole bunch of knitted hats I made over the last year or two that have yet to make an appearance on the blog. So uncharacteristic! Luckily, this means I have a good-sized group to share, some of which were real successes, and some of which missed the mark. Since my knitting skills are not as advanced as my sewing skills, this is pretty much par for the course. I love knitting hats, though, because I like wearing hats, and they are a smaller project, so they don’t take as long to knit as a sweater or something larger might. If you’re a knitter, maybe you’ll discover a new pattern here. Let’s dive in! First up, successes.
Hats that Worked!
Pattern: High Cliff
Pattern source/designer: the book Plum Dandi Knits by Alicia Plummer and Melissa Schaschwary; this pattern is by Melissa Schaschwary
Yarn: bulky; I used a really beautiful hand-dyed 85% wool/15% mohair yarn that I got from Pindrop Shop on Etsy during last year’s Black Friday sale.
New technique: I tried cabling without a cable needle a few times, using Andrea Mowry’s video
Of all the hats here, this is my most successful and most recently made hat. I checked this book out from the library, and chose this pattern because I have been wanting to try cables again, and this just has one big one. It turned out to be really fun, interesting, and fast. I made this hat in three days of very occasional knitting. It probably helped that I made it an inch and a half shorter than the pattern calls for.
As for the yarn, it took me a long time to figure out what I wanted to use it for, but it was perfect for this hat. To my delight, the yarn sort of faded from one color to the other, reminding me of decorative corn where each kernel is a different color.
I still have to decide if it needs a pompom.
This hat fits great, and I have already worn it a lot. I love it!
Pattern: Ribbed Watchman’s Hat
Pattern source/designer: Channah Koppel
Yarn: worsted; Encore by Plymouth yarn, which is 75% acrylic/25% wool and is machine washable; I got this at Yarn on Front in Dowagiac, MI
This hat is actually a gift (shhh!), but I think I’m safe. I don’t think the intended recipient reads my blog. This was knit to said intended recipient’s requirements: a ribbed hat that is machine washable in yellow with a fold-up brim.
I’ve been really into the Twisted German Cast On lately, so I used that to cast on, and I knit to 11 inches before decreasing, rather than the 9.5 inches in the pattern, so that the brim could be turned up. This took me awhile, but not forever, and I think it turned out pretty well. Hopefully it’s well-received!
Pattern: Vintage Prim
Pattern source/designer: Andrea Mowry of Drea Renee Knits
Yarn: fingering; Sock Yarn by Birch Dyeworks in colorway Pixie on a Bender, which is 80% superwash merino wool/20% nylon
Perennial by Kelbourne Woolens in Purple, which is 60% superwash merino wool/25% suri alpaca/15% nylon
Both yarns came from Pintuck & Purl; the Birch Dyeworks yarn was actually given to me by Maggie, the owner, for some socks we were going to knit together that we…uh…never really completed. I think we knit about half an inch before calling it quits. Haha.
New Technique: BRIOCHE KNITTING!
I am so proud of this hat. I had never successfully knit brioche before trying this hat, so I was barely hanging on through this whole pattern. There are a ton of mistakes in it, but due to my inexperience with brioche, I wasn’t sure how to fix them, and sometimes I’m sure I didn’t even notice them! Somehow, though, I made it through, and I love this hat. I think it is probably a little slouchier than it should be, but I don’t even care.
It’s really a testament to Andrea Mowry’s great patterns and YouTube video support that I even completed this. Someday I will have to try another brioche project to really get the technique down. One of my favorite things about this kind of knitting? It’s reversible!
As for the yarn, I love, love, love both of these yarns. Mary, the owner of Birch Dyeworks is a real artist who has an amazing eye for color, and is excellent in several crafting arenas. There are a lot of beautiful hand-dyed yarns out there, but Mary’s are some of my favorites. And the Perennial is soft and lovely. I have it in a few colors and definitely need to use it more. If I were to do this pattern again, I don’t know that I would use this exact color combination, but I would definitely look for colors that contrast like these do to really make the design stand out.
The Hat that Worked Some of the Time
Pattern: Eva
Pattern source/designer: Wild Honey Design on Etsy; no longer available
Yarn: the blue and light pink hats are made from Comfort DK by Berroco in colors 2705 (light pink) and 2753 (indigo blue); this yarn is 50% super fine nylon/50% super fine acrylic; I got this at Coveted Yarn in Gloucester, MA
the purple, gray, and white hat is in worsted weight 100% Shetland wool yarn from Yates Farm in Vermont many years ago
This wasn’t a well-written pattern, but the color chart was a lot of fun. The pattern says to use Alafosslopi yarn, which is a bulky weight, but I have tried it in various yarns with various needle sizes to adjust the sizing. It looks like I didn’t take as many notes as I should have, but my first try in DK yarn gave me about a toddler or teddy bear sized hat. I often (though not exclusively) like natural materials, and before buying this Berroco Comfort DK, I confess to being a little bit snobby in my heart about yarn, only wanting to use wool or alpaca or something. This yarn really changed my mind. It is a delight to knit with and washes and wears great!
For my second try, I used larger needles and came up with a larger child’s size.
After that, I tried some of my worsted Shetland yarn that, for me, with my looser knitting, typically knits up to a bulky gauge. It worked, but the brim let the wind blow through while the colorwork section was pretty warm.
If I were to do this again with the same Shetland yarn, I would double the length of the brim so I could fold it up, and go up one needle size for a better fit in the colorwork area. I absolutely loved the look of this purple and gray hat, but in the end, I gave it away because I could tell I wouldn’t wear it if the wind blew through the part over my ears, and I was too lazy to alter it! I don’t like to go back into old projects. I’m still coming around to the idea that I can unravel knitwear that didn’t work out the way I wanted.
Despite the sparse directions, I have made enough of my own notes that I would definitely make this again. I love knitting hats and I love stranded colorwork, so this is a good project for me.
Hats that Did Not Work
Before we get to these, I’ll admit that these failed due to user error. I’m definitely still learning!
Pattern: Chunky Walnut
Pattern source/designer: Katrin Schubert
Yarn: worsted weight 100% Shetland yarn from Yates Farm in Vermont; this pattern calls for chunky weight yarn and this yarn knits to a bulky weight, plus I am a loose knitter, so that probably adds up to chunky, right?
This pattern looks so cool, and I dove in with some of my worsted weight Shetland yarn (I seriously have so much), but somewhere around Round 15, I messed something up, and I could never figure out what I had done. The hat fit fine, but it bugged me. Whatever mistake I had made obscured the design, so I gave the hat away.
I would love to try this again at some point. It’s a really cool design.
Pattern: Urban Jungle Hat
Pattern source/designer: Rachel Illsley of Unwind Knitwear
Yarn: white mystery cone yarn given to me by Maggie of Pintuck & Purl; I did a bleach test and it is a natural fiber–I’m guessing wool, maybe superwash; it’s fingering weight
Perennial by Kelbourne Woolens in Neon Coral, which is 60% superwash merino wool/25% suri alpaca/15% nylon; fingering weight; this also came from Pindrop Shop on Etsy during last year’s Black Friday sale
hand dyed lace weight yarn in Lilac Dreams from YouKnitIDye on Etsy; this is 72% ultrafine mohair/28% mulberry silk
So…you’re supposed to use DK weight yarn and lace weight mohair in this pattern. I didn’t have DK that I wanted to use, but I was excited about the colors I had in fingering weight with the mohair, so I held my two fingering yarns double to equal DK. That should have worked, in theory, but the Neon Coral yarn is definitely thinner than the white yarn. Also, I’m a loose knitter who doesn’t do gauge swatches for hats.
My hat came out huge. HUGE! It sort of looked like a toadstool hat when I was done with it. I probably should have only doubled the coral and not the white or just used fingering with the mohair. Oh. And I shouldn’t have made the large slouchy version.
I did eventually (after putting the hat in a long time out) unravel this one. The yarns were a little too special to just get rid of a hat that maybe no one would even want to wear. It was a beast to unravel, though, since I was unravelling five strands of yarn at once. Ugh.
You know, I usually never like leopard print, but I do like it in this hat. The colorwork chart is very interesting. It’s possible that I will revisit it someday. It’s definitely a cool pattern, even if I didn’t make it very well.
Whew! Now I’m all caught up on blogging my knit hats! Hopefully you will find a hat or two you might want to knit, or maybe you can laugh at my mistakes.
On the sewing front, I was actually starting to lose my sewjo, which has never happened to me before. I could never understand how people just stopped wanting to sew, but it began to happen to me. You know what I think it was? My work space was buried under piles and I had a million ideas, but hadn’t committed to a single one.
So, I cleaned up my space, and chose and committed to my next few projects. Then I made a plan to work on them a little bit most days. Now I’m back up and running, so I hope to have some projects to share with you soon. 🙂
Pattern and Branch 