Simplicity 9449 Skirt–A Reissued Vintage Pattern

It is catch-up time around here! I have several things I have knit or sewn that have been waiting for their turn on the blog, and this is my oldest sewing project in that category. I made Simplicity 9449, View D, a full skirt, for my daughter to wear to church on Christmas Eve 2021. Yikes. My tardiness aside, I would like to say that I just love it when the Big 4 reissue some of their vintage patterns. These are our heritage brands, and they have an amazing catalogue of patterns. I love so many of the vintage ones, but finding one in your size, especially if you don’t fall into typically vintage sizing, can be tricky. The reissues are great because they come in modern size ranges with multiple sizes in one envelope–excellent if you fall into more than one size. One funny thing I noticed, however, was that although this pattern says it’s from the 1960’s on the pattern envelope, there are fashion facts from the 1950’s on the instructions inside. After looking up the original, Simplicity 1235, on the Vintage Pattern Wiki, I found that it was originally published in 1955, so I guess the outside date is a typo.

l

Simplicity 9449 comes with four views: a dress, a jumper, a slim skirt, and a full skirt. My daughter wanted the full skirt, View D, so I went off to Joann’s and found a suitably Christmas-y fabric–a burgundy (AKA “Tawny Port”) polyester crepe. I think it was from their Casa collection, which has fancier fabrics.

Simplicity 9449 front view

Helpfully, Joann’s had coordinating zippers for this fabric line, so I grabbed a matching invisible zipper as well. What a beautiful thing to have perfectly matched fabric and zipper!

We made a few changes to the pattern. I moved the side zipper to the back and we added some in-seam pockets in a fun Rifle Paper Co. quilting cotton that I had left over in my stash.

l

Simplicity 9449, inside front

l

Simplicity 9449, inside back

We omitted the patch pockets that came with the pattern. The pocket pattern piece and directions we did use came from Simplicity 8689. I also added an extra bar to the waistband so that you could adjust the tightness of the waistband just a little bit depending on how you are feeling on a given day.

Overall, it wasn’t too hard to sew, which is great because I do not love sewing to a deadline, and this was definitely one of those deadline situations. I used a microtex 70/10 needle in my sewing machine, sewed everything with a straight stitch and finished seams with my serger. I used silk pins, and did a rolled hem using my sewing machine. That seemed faster than following the hemming directions and I wanted to practice rolled hems.

My rolled hem–not perfect, but improving!

Also, following the hemming directions would have involved a fair amount of pressing, and this fabric did not press well, which is unsurprising since it is made of polyester and is a bouncy crepe. While the pattern envelope calls for an invisible zipper, the directions inside for View D show a standard zipper, so I used the instructions on the zipper package to shorten and install it.

Simplicity 9449 back view (which looks pretty much like the front view)

After I finished, the side seams were weirdly puckered, which you can kind of see in the picture below.

I resewed them once in case I had caused it by tugging on them to match them up lengthwise, but it didn’t help. Was it because they were on the bias? Because I serged the seam allowances incorrectly somehow? I’m not sure. The front and back seams were just fine, but they’re also on the straight grain, so they’re more stable.

All told, I’m pretty happy with this project, and I think my daughter was, too. This is maybe a half circle skirt, and she loved the fullness, especially when worn with a petticoat. Unfortunately, the polyester fabric is a major static magnet, which is kind of a bummer. So, there were pros and cons. Typos aside, I would make this pattern again. I would rather not use that polyester crepe fabric a second time, however.

This is a good basic pattern that easily gives you a vintage or modern look, depending on how you tweak and style it. Even better, it was something I could make in a short amount of time in the midst of everything else I was working on.

Advertisement

Peppermint Magazine Peplum Top in Robert Kaufman’s Limerick Linen

I didn’t manage to get a lot of sewing done this summer, but I did make a few things! One was the Peplum Top from Peppermint Magazine/In the Folds.

I’ve made this one before, back in 2018 when I made two versions. It’s such a fun shirt and a nice pattern that I wanted to revisit it and see if I could squeeze it out of some Robert Kaufman Limerick Linen scraps I had saved from the time I made my friend a jacket using Simplicity 8172. Oh, this linen! It’s so beautiful and so floaty. I love it.

Before starting, I looked back at my old post to see what changes I had made to the pattern. I used those again: a minor forward shoulder adjustment, and lengthening the top by two inches, although this time I added one of the inches to the bodice and one inch to the peplum. I made size G, and found a surprising error on the pattern. Even though the key to the sizes shows different line styles for sizes G and F, on the printed and assembled PDF, they both look the same. I just had to count up or down to my size to make sure I was on track. It’s very possible this problem has been fixed since I downloaded it, but keep an eye out just in case if your are sewing either of those two sizes.

This fabric is a little shifty to cut, so you need to be careful and go a little bit slowly. This can be an issue while sewing, too, so make sure you stay stitch the front and back neckline before getting started. It’s not a hard fabric to sew–just be aware that it can shift. Handle it carefully, and you’ll be fine.

I tested out various trim options, but in the end, I decided to keep the outside of the top plain to let the linen shine through, although I did use some fun Rifle Paper Co. rayon bias binding I made instead of the facings. After doing the forward shoulder adjustment, I didn’t really want to alter the facings when I had this pretty option I could use instead. I used my serger to finish my other seams, so the inside looks nice and neat.

Peplum Top front–you can see peeks of the bias binding; the quilt in the background was made by my Mom!

l

Peplum Top, back

When I finish a garment, unless I really hate it, I usually feel like it’s THE BEST THING EVER and MY NEW FAVORITE and so on and so forth. I loved this when I first made it–and I still do, but wearing it a few times has helped me to see not only its best qualities, but also some that I like less. The pros are that this is a great pattern in beautiful fabric, and it feels like an absolute dream to wear in the summer. It’s cool and breezy and SO GOOD. Another thing that I love is that because it is dartless, it’s also reversible. I love it both ways. Each one is a little different. The parts I like a little less are that at this size, the armholes are a little low, and show my bra. The beautiful volume that allows this to feel so light and breezy also can have a bit of a pregnancy look, especially from the side. That would be different in a drapier fabric like a silk crepe de chine or a rayon challis, but in a fabric with any amount of body, you need to be prepared for volume. In general, I like the volume, but not always.

All that being said, I really do love this top. I think it will look great as the season turns, on those days when it’s cool enough for jeans and a jacket, but still warm enough for a sleeveless or short-sleeved shirt. I had to do a lot of piecing on the peplum to get it out of the small amount of fabric I had, but I made it with only two scraps left over. Man, I love linen!

Last, but not least, guess what? Today is the nine year anniversary of this blog! Wow! It’s great to be able to look back and see how much I have grown as a sewist and craftsman, how much my focus has both narrowed to sewing, and then expanded to making garments in general with the reintroduction of knitting to my crafting skillset. Will shoes be next? Will I ever make a straw hat? Who knows?! Thanks for reading along, though. I really appreciate it. 🙂

A Linen Jacket for my Friend: Simplicity 8172

It’s not too often that I sew for someone else, but today’s project is one of those rare ones.  I can probably count on one or two hands the people I’m willing to sew for, and my friend Jo-Alice definitely makes the cut.  If I listed all of her wonderful qualities, this blog post would become a book, but let’s just say that she’s one of those rare people who manages to be both very real and very loving—not an easy feat.

When she mentioned that she liked some of the views of Simplicity 8172 after I made it last year, I mulled it over and then asked her if she still liked the pattern and would want me to make one for her.  She said she did still like it, and after I convinced her that I really wanted to make her something for her birthday, she agreed.  Being a maker of things herself (you can see some of her pottery and knitting here), she knows the time that goes into creative projects, and she didn’t want to pull me away from my personal to-make list, but this was a gift I was happy to spend the time on.

l

I found some beautiful Limerick Linen by Robert Kaufman Fabrics at Pintuck & Purl as well as a floral rayon by Rifle Paper Co. for Cotton + Steel (this one I think?).  Jo-Alice chose View C, because it had some nice waist shaping, and I made a muslin out of an old sheet to check the fit.  We thought we were going to have to shorten the pattern, but the muslin showed that the length was good as drafted.

It was important to think about seam finishes on this project since the pattern doesn’t always specify what you should use.  Because the linen was on the lighter side, I chose to use French seams throughout.

The fabric itself is a slightly loose weave, which made it a bit shifty, but it was such a beautiful fabric, that I loved working with it regardless.  I kept my eye on things to make sure that everything stayed on-grain, and it was fine.

l

I decided to make my bias tape from the rayon which, admittedly, I stalled on.  I really wanted to teach myself how to make continuous bias tape, but I was intimidated by learning a new process.  My co-worker, Bea, an accomplished quilter, gave me a few tips on using starch on my fabric, which was the push I needed to keep going.  She let me borrow some Linit starch, which she said to mix 1:1 with water in a spray bottle.

Next she told me to spray the back of the fabric (testing in a small area first) and then press the fabric.  I didn’t use steam.  This stiffened the fabric enough to make it really easy to work with.  It was still flexible, but wasn’t overly shifty or slippery.  After that, I used the tutorial for making bias tape in Learning to Quilt:  A Beginner’s Guide by Lori Yetmar Smith.

I made single fold bias tape to the size I needed using a bias tape maker (I got assorted sizes on Amazon—similar to these).  One yard of 44″ wide fabric make A LOT of bias tape.  I definitely could have used less, but you don’t know until you try.  And…it’s not like I mind having all this beautiful leftover bias tape.

While my bias tape was uniform on the visible side, the edges that were folded under weren’t perfectly even.  To help myself out when applying it, I sewed a line of basting stitches 3/8″ from the edge where I was going to attach the bias tape since that was the seam allowance there.  Then I lined up the folded edge with my basting stitches so that everything would look nice and even.

l

The one area where I wasn’t quite sure what seam finish to use was the cuffs.  I did a quick experiment with some scrap fabric just to see if all those layers would be too bulky, but with the lighter weight of the linen it seemed OK to me, so I was able to use French seams there as well.

Overall, this was a very simple and pleasant project.  I was worried at the end that the fit would be different than it had been on the muslin, but Jo-Alice loved it, and it looked beautiful on her.  I like this longer view much better than the short view (View A) that I chose the first time I made this.  And, although I told her that she didn’t have to pose for blog photos, she has always been a huge supporter of my creative projects and assured me that she was more than willing.  She makes a great model.  We had lots of fun shooting these pictures even though it was gray and rainy out.

l

l

l

l

l

 

 

Open Wide Zippered Pouches in Rifle Paper Co. Rosa

Today I have some cute little zippered pouches to share with you.  If you think you have seen something like this before on the blog, you’re right!  I made these as gifts back in 2017.  🙂

The Open Wide Zippered Pouch is a free tutorial from Anna Graham of the blog noodlehead.  It comes with options for three different sizes.  I chose to make two of the small size bags and reverse which fabrics were on the inside and outside, so I could have the best of all worlds with this pair of bags.  I got my fabric (Rifle Paper Co. Menagerie Rosa in Hunter and Violet Metallic quilting cotton) and zippers from Pintuck & Purl.  I used Fusible Featherweight interfacing from Pellon (because I had it on hand for garment-sewing) that I got from Joann Fabrics.

The small size bags start out as 10″ x 7″ rectangles of fabric, making the finished size slightly smaller.  These are great for holding pens and pencils or as travel bags to hold all your odds and ends.

l

l

l

The tutorial itself is easy to follow and gives you a nice finished product where all the raw edges (including the zipper’s raw edges) are enclosed.  My stitching on the zipper tab got a little wobbly, but I didn’t feel like ripping it out to do again, so I decided it was good enough.

This is a great, useful scrap buster and is good for gifts, including gifts to yourself.  😉